Dhcp Server Netbios-Type - 3Com 8807 Command Reference Manual

DHCP Server Configuration Commands 831
undo dhcp server nbns-list { ip-address | all } { interface vlan-interface vlan-id
[ to vlan-interface vlan-id ] | all }
View
VLAN interface view, system view
Parameter
ip-address: NetBIOS server IP address. You can specify up to eight IP addresses
(separated by spaces) in one command.
interface vlan-interface vlan-id [ to vlan-interface vlan-id ]: Specifies one VLAN
interface, or a range of VLAN interfaces.
all: Specifies all VLAN interfaces or all configured IP addresses.
Description
Use the dhcp server nbns-list command to configure one or more NetBIOS
server IP addresses for the DHCP address pool of current VLAN interface, or for the
DHCP address pool(s) of the specified VLAN interface(s).
Use the undo dhcp server nbns-list command to remove one or all NetBIOS
server IP addresses configured for the DHCP address pool of current VLAN
interface, or for the DHCP address pool(s) of the specified VLAN interface(s).
By default, no NetBIOS server IP address is configured.
With eight NetBIOS server addresses already configured, if you add a new one by
executing the dhcp server nbns-list command, the newly configured one
overwrites the oldest one.
Related command: nbns-list, dhcp server netbios-type.
Example
# Configure the NetBIOS server with an IP address of 10.12.1.99 for the DHCP
address pool of VLAN interface 1.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface vlan-interface 1
[3Com-Vlan-interface1] dhcp server nbns-list 10.12.1.99

dhcp server netbios-type

Syntax
In VLAN interface view:
dhcp server netbios-type { b-node | h-node | m-node | p-node }
undo dhcp server netbios-type
In system view:
dhcp server netbios-type { b-node | h-node | m-node | p-node } { interface
vlan-interface vlan-id [ to vlan-interface vlan-id ] | all }