Log-Peer-Change; Network - 3Com 8807 Command Reference Manual

522 C 27: BGP C C
HAPTER ONFIGURATION OMMANDS

network

Syntax
network ip-address [ address-mask ] [ route-policy route-policy-name ]
undo network ip-address [ address-mask ] [ route-policy route-policy-name ]
View
BGP view
Parameter
ip-address: Network address that BGP advertises.
address-mask: Mask of the network address.
route-policy-name: Route-policy applied to advertised routes.
Description
Use the network command to configure the network routes advertised by the
local BGP.
Use the undo network command to cancel the existing configuration.
By default, the local BGP does not advertise any routes.
Example
# Advertise routes to the network segment 10.0.0.0/16.
[3Com-bgp] network 10.0.0.1 255.255.0.0

log-peer-change

Syntax
log-peer-change
undo log-peer-change
View
BGP view
Parameter
None
Description
Use the log-peer-change command to enable the switch for reporting the BGP
peer changes and print the BGP state change messages onto the screen. Use the
undo log-peer-change command to disable this function.
The switch for reporting BGP peer changes is disabled by default.
Example
# Enable the switch for reporting the BGP peer changes.
<SW8800> system-view
[SW8800] bgp
[3Com-bgp] log-peer-change