3Com 8807 Command Reference Manual page 173

MSTP Configuration Commands 171
] | [ ppm | ptx | tcpm] ] | interface interface-type interface-number { lacp-key |
packet | event } }
View
User view
Parameter
None
Description
Use the debugging stp { global-error | global-event } command to enable STP
global error or event debugging.
Use the undo debugging stp { global-error | global-event } command to
disable STP global error or event debugging.
Use the debugging stp all command to enable global debugging.
Use the undo debugging stp all command to disable global debugging.
Use the debugging stp event command to enable event debugging of MSTP.
Use the undo debugging stp event to disable event debugging of MSTP.
Use the debugging stp packet command to enable packet debugging of MSTP.
Use the undo debugging stp packet command to disable packet debugging of
MSTP.
Use the debugging stp instance instance-id command to enable specified
instance debugging of MTSP.
Use the undo debugging stp instance instance-id command to disable specified
instance debugging of MTSP.
Use the debugging stp lacp-key command to enable MD5 summary information
debugging of LACP protocol.
Use the undo debugging stp lacp-key command to disable MD5 summary
information debugging of LACP protocol.
Use the debugging stp state-machine command to enable debugging of the
state machine.
Use the undo debugging stp state-machine command to disable debugging of
the state machine.
Use the debugging stp state-machine pim command to enable debugging of
the port information state machine.
Use the undo debugging stp state-machine pim command to disable
debugging of the port information state machine.