Default Tag; Default Type - 3Com 8807 Command Reference Manual

OSPF Configuration Commands 419
Example
# Specify the default value of OSPF imported external routes as 200.
[3Com-ospf-1] default limit 200

default tag

Syntax
default tag tag
undo default tag
View
OSPF view
Parameter
tag: Default tag, ranging from 0 to 4,294,967,295. The default value is 1.
Description
Use the default tag command to configure the default tag that OSPF assigns to
imported routes.
Use the undo default tag command to restore the default of the default tag that
OSPF assigns to imported routes.
When OSPF imports a route found by other routing protocols in the router and
uses it as the external routing information of its own autonomous system, some
additional parameters are required, including the default cost and the default tag
of the route.
Related command: default type.
Example
# Set the default tag that OSPF assigns to imported routes to 10.
[3Com-ospf-1] default tag 10

default type

Syntax
default type { 1 | 2 }
undo default type
View
OSPF view
Parameter
type 1: External routes of type 1.
type 2: External routes of type 2.
Description
Use the default type command to configure the default type when OSPF imports
external routes.