Rmon Alarm - 3Com 8807 Command Reference Manual

922 C 54: RMON C
HAPTER

rmon alarm

C
ONFIGURATION OMMANDS
<SW8800> display rmon statistics Ethernet 2/1/1
Statistics entry 1 owned by aaa is VALID.
Interface : Ethernet2/1/1<ifIndex.872418178>
etherStatsOctets
etherStatsBroadcastPkts
etherStatsUndersizePkts
etherStatsFragments
etherStatsCRCAlignErrors : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length (etherStatsPktsXXXtoYYYOctets):
64 : 0
256-511: 0
Syntax
rmon alarm entry-number alarm-variable sampling-time { delta | absolute }
rising-threshold threshold-value1 event-entry1 falling-threshold
threshold-value2 event-entry2 [ owner text ]
undo rmon alarm entry-number
View
System view
Parameter
entry-number: Number of the entry to be added/deleted, ranging from 1 to
65535.
alarm-variable: Specifies the alarm variable with a character string, ranging from 1
to 256, in the OID dotted format, like 1.3.6.1.2.1.2.1.10.1 (or ifInOctets.1).
sampling-time: Specifies the sampling interval, ranging from 5 to 65535
(measured in seconds).
delta: Sampling type is delta.
absolute: Sampling type is absolute.
rising-threshold threshold-value1: Rising threshold, ranging from 0 to
2147483647.
event-entry1: Event number corresponding to the upper limit of threshold,
ranging from 0 to 65535.
falling-threshold threshold-value2: Falling threshold, ranging from 0 to
2147483647.
event-entry2: Event number corresponding to the falling threshold, ranging from
0 to 65535.
owner text: Specifies the creator of the alarm. Length of the character string
ranges from 1 to 127.
Description
Use the rmon alarm command to add an entry to the alarm table.
: 756 , etherStatsPkts
: 9 , etherStatsMulticastPkts : 0
: 0 , etherStatsOversizePkts
: 0 , etherStatsJabbers
, etherStatsCollisions
, 65-127 : 444
, 512-1023: 0
, 128-255 : 0
, 1024-max : 0
: 9
: 0
: 0
: 0