Compare-Different-As-Med - 3Com 8807 Command Reference Manual

BGP Configuration Commands 499
Example
# Set the number of supported BGP equivalent routes to 3.
[3Com-bgp] balance 3
bgp Syntax
bgp as-number
undo bgp [as-number ]
View
System view
Parameter
as-number: The specified local AS number, in the range of 1 to 65535.
Description
Use the bgp command to enable BGP and enter the BGP view.
Use the undo bgp command to disable BGP.
By default, the system does not run BGP.
This command is used to enable and disable BGP as well as to specify the local AS
number of BGP.
Example
# Enable BGP.
[SW8800] bgp 100
[3Com-bgp]
compare-different-as-me Syntax
d

compare-different-as-med

undo compare-different-as-med
View
BGP view
Parameter
None
Description
Use the compare-different-as-med command to enable comparison of MED
values from different AS neighboring routes.
Use the undo compare-different-as-med command to disable the comparison.
By default, it is disabled to compare the MED attribute values from the routing
paths of different AS peers.