3Com 8807 Command Reference Manual page 369

HWTACACS Configuration Commands 367
Parameter
with-domain: Specifies that the domain name is taken along with the username
that will be sent to the TACACS server.
without-domain: Specifies that no domain name is taken along with the
username that will be sent to the TACACS server.
Description
Use the user-name-format command to set the username format acceptable to
the TACACS server.
For a HWTACACS scheme, each username sent to a TACACS server contains a
domain name by default.
Username is usually in the "userid@isp-name" format, with the ISP domain name
following "@". The switch uses domain names to group users to different ISP
domains. While some earlier TACACS servers do not accept the username with
domain name. In this case, you must remove the domain name before sending a
username to the server.
n
When you specify that no ISP domain name is contained in usernames for a
HWTACACS scheme, this scheme cannot be used in two or more ISP domains at
the same time; otherwise, errors may occur because the TACACS server considers
users in different ISP domains but with the same name as one user.
Related command: hwtacacs scheme.
Example
# Specify that no domain name is taken along with the username that will be sent
out with the HWTACACS scheme 3com.
[3Com-hwtacacs-3com] user-name-format without-domain