Port Trunk Pvid Vlan; Port Trunk Permit Vlan - 3Com 8807 Command Reference Manual

Ethernet Port Configuration Commands 145

port trunk permit vlan

Syntax
port trunk permit vlan { vlan-id-list | all }
undo port trunk permit vlan { vlan-id-list | all }
View
Ethernet port view
Parameter
vlan-id-list: vlan-id-list = [ vlan-id1 [ to vlan-id2 ] ]&<1-10> is the VLAN range
joined by the trunk port. It can be discrete. The vlan-id ranges from 2 to 4,094.
&<1-10> indicates that the former parameter can be input 10 times repeatedly at
most.
all: Joins the trunk port to all VLANs.
Description
Use the port trunk permit vlan command to join trunk port to specified VLAN.
Use the undo port trunk permit vlan command to cancel trunk port from
specified VLAN.
Trunk port can belong to multiple VLANs. If the port trunk permit vlan
command is used many times, then the VLAN enabled to pass on trunk port is the
set of these vlan-id-list.
Related command: port link-type.
Example
# Remove the trunk port from the default VLAN.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface Ethernet2/1/1
[3Com-Ethernet2/1/1] undo port trunk permit vlan 1
# Add the trunk port to all VLANs.
[3Com-Ethernet2/1/1] port trunk permit vlan all

port trunk pvid vlan

Syntax
port trunk pvid vlan vlan-id
undo port trunk pvid
View
Ethernet port view
Parameter
vlan-id: VLAN ID defined in IEEE802.1Q, ranging from1 to 4,094 and the default
vlan-id is 1.