Peer Description; Peer Ebgp-Max-Hop - 3Com 8807 Command Reference Manual

BGP Configuration Commands 527
Use the undo peer default-route-advertise command to cancel the existing
configuration.
By default, a peer group does not import the default route.
For this command, no default route needs to exist in the routing table. A default
route is sent unconditionally to a peer with the next hop as itself.
Example
# Configure a peer group named test to generate a default route.
[3Com-bgp] peer test default-route-advertise

peer description

Syntax
peer { group-name | peer-address } description description-line
undo peer { group-name | peer-address } description
View
BGP view
Parameter
group-name: Group name.
peer-address: Address of the peer.
description-line: Description information configured, which can be letters or
numbers with the maximum length of 79.
Description
Use the peer description command to configure the description information of
the peer/peer group.
Use the undo peer description command to cancel the description information
of the peer/peer group.
By default, description information of peers/peer group is not configured.
Related command: display current-configuration, display bgp routing-table
peer, display bgp routing-table group.
Example
# Configure the description information of the peer whose name is group1 as
beijing1.
[3Com-bgp] peer group1 description beijing1

peer ebgp-max-hop

Syntax
peer group-name ebgp-max-hop [ ttl ]
undo peer group-name ebgp-max-hop