Debugging Multicast Forwarding; Debugging Multicast Kernel-Routing - 3Com 8807 Command Reference Manual

584 C 33: M
HAPTER ULTICAST
debugging multicast
forwarding
debugging multicast
kernel-routing
C C C
OMMON ONFIGURATION OMMANDS
No distinction is made between known multicast and unknown multicast for
multicast suppression.
Related command: multicast-suppression.
Example
# Set the broadcast suppression ratio to 40%.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface Ethernet 2/1/1
[3Com-Ethernet2/1/1] broadcast-suppression 40
# Set the broadcast suppression bandwidth to 40Mbit.
[3Com-Ethernet2/1/1] broadcast-suppression bandwidth 40
# Disable broadcast suppression.
[3Com-Ethernet2/1/1] undo broadcast-suppression
Syntax

debugging multicast forwarding

undo debugging multicast forwarding
View
User view
Parameter
None
Description
Use the debugging multicast forwarding command to enable multicast packet
forwarding debugging functions.
Use the undo debugging multicast forwarding command to disable the
debugging functions.
By default, the debugging function is disabled.
Example
# Enable multicast packet forwarding debugging functions.
<SW8800> debugging multicast forwarding
Syntax

debugging multicast kernel-routing

undo debugging multicast kernel-routing
View
User view