3Com 8807 Command Reference Manual page 763

41
CCC Configuration
Commands
MPLS VLL C
C
OMMANDS
n
L2VPN mentioned below refers to VLL L2VPN.
ccc Syntax
ccc ccc-connection-name interface vlan-interface vlan-id { transmit-lsp
transmit-lsp-name receive-lsp receive-lsp-name | out-interface outinterface-type
outinterface-number }
undo ccc ccc-connection-name
View
System view
Parameter
ccc-connection-name: Name of the CCC (circuit cross connect) connection, which
is used to uniquely identify the CCC connection in the PE (provider edge). This
argument is 1 to 20 characters in length.
vlan-id: ID of the VLAN whose interface is used to establish the connection. It must
be the ID of an existing VLAN.
transmit-lsp-name: Name of transmitting LSP (the ingress LSP).
receive-lsp-name: Name of receiving LSP (the egress LSP).
outinterface-type outinterface-number: Name of the interface connecting to the
second CE (custom edge).
Description
Use the ccc ccc-connection-name interface vlan-interface vlan-id transmit-lsp
receive-lsp command to create a remote CCC connection.
Use the ccc ccc-connection-name interface vlan-interface vlan-id out-interface
command to create a local CCC connection.
Use the undo ccc command to remove a local/remote CCC connection.
When the interface is a VLAN interface, a CCC connection encapsulates data as
Ethernet packets by default.
ONFIGURATION