Mac-Address - 3Com 8807 Command Reference Manual

[3Com-GigabitEthernet3/1/4] interface vlan-interface 100
[3Com-Vlan-interface100] undo ip address
[3Com-Vlan-interface100] L2 binding vsi 3Com
c
CAUTION:
If you have enabled GVRP, STP or 802.1x protocol for a port, you are prohibited
■
from enabling VLAN VPN feature for the port.
If you have enabled IGMP Snooping or IGMP for the VLAN which the port
■
belongs to, you are prohibited to enable VLAN VPN feature for the port.
Similarly, if you have enabled VLAN VPN feature for the port, you are prohibited
from enabling IGMP Snooping or IGMP for the VLAN which the port belongs
to.
If you want to add the ports with VLAN VPN enabled to a VLAN, you cannot
■
enable IGMP Snooping in the VLAN and enable IGMP for the VLAN interface.
You cannot configure an IP address for a VLAN interface with a VSI bound to it.
■
Similarly, you cannot bind a VSI to a VLAN interface with an IP address
configured.
You can bind one VSI to up to eight VLANs.
■
You cannot bind any VSI to Vlan-interface1.
■

mac-address

Syntax
mac-address { static H-H-H } vsi vsi-name { peer peer-ip | vlan-interface
vlan-interface-number }
undo mac-address { static H-H-H } vsi vsi-name
View
System view
Parameter
static: Specifies a static MAC address. Only static VSI MAC addresses are allowed
at present.
H-H-H: Value of the static MAC address.
vsi: Specifies a VSI name.
vsi-name: VSI name.
peer: Specifies the remote peer corresponding to the static MAC address.
peer-ip: Specifies the IP address of the remote peer corresponding to the static
MAC address.
vlan-interface: Specifies the VLAN interface of the local peer corresponding to
the static MAC address.
vlan-interface-number: Number of the specified VLAN interface
VPLS Configuration Commands 781