Traffic-Redirect - 3Com 8807 Command Reference Manual

DSCP priorities and EXP values of MPLS packets. To choose this mode, specify the
remark-policed-service dscp dscp-value when executing this command.
4 Specify a set of service parameters. To choose this mode, specify
remark-policed-service untrusted dscp dscp-value cos cos-value
local-precedence local-precedence drop-priority drop-level parameter when
executing this command.
n
The "DSCP + Conform-Level -> Service-parameter" mapping table and "EXP +
■
Conform-Level -> Service-parameter" mapping table here are mapping tables
with the Conform-Level of 0.
Before selecting the second or third mode listed above, make sure the "DSCP +
■
Conform-Level -> Service-parameter" mapping table and "EXP +
Conform-Level -> Service-parameter" mapping table already exist. For more
information about these mapping tables, refer to the qos conform-level,
dscp, and exp commands.
Example
# Choose automatically-allocated service parameters for the packets matching the
rules that permit packets in the ACL 3000 in the data flow that the ports in VLAN
receives.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] vlan 2
[3Com-vlan2] traffic-priority inbound ip-group 3000 auto

traffic-redirect

Syntax
traffic-redirect inbound ip-group { acl-number | acl-name } [ rule rule [
system-index index ] ] { cpu | next-hop ip-addr1 [ip-addr2] [ invalid { forward |
drop } ] }
undo traffic-redirect inbound ip-group { acl-number | acl-name } [ rule rule ]
View
VLAN view
Parameter
inbound: Redirects data packets received by a port.
ip-group { acl-number | acl-name }: Activates IP ACLs, including basic and
advanced ACLs. acl-number: Sequence number of ACL, ranging from 2000 to
3999. acl-name: Name of the ACL, which must be a character string starting with
an English letter (a-z or A-Z), and without any space in it.
rule rule: Specifies the subitem of an active ACL, ranging from 0 to 127; if not
specified, all subitems of ACL will be activated.
system-index index: Specifies the system index value of the rule which will be
indexed during operation. After delivering a rule, the system automatically assigns
a globally unique index value to the rule. When using this command to deliver a
rule, you can also specify a system index value for the rule, but the value may
VLAN-ACL Configuration Commands 287