Display Snmp-Agent Usm-User - 3Com 8807 Command Reference Manual

904 C 53: SNMP C
HAPTER
display snmp-agent
usm-user
C
ONFIGURATION OMMANDS
Description
Use the display snmp-agent sys-info command to view the character string
sysContact (system contact), character string describing the system location and
the version information about the running SMNMP in the system.
Example
# Display the character string sysContact.
<SW8800> display snmp-agent sys-info contact
The contact person for this managed node:
R&D Beijing, 3Com Corporation co.,Ltd.
The above information represents that the contact person for this machine is R&D
Beijing, 3Com Corporation co.,Ltd
# Display the character string describing the system location.
<SW8800> display snmp-agent sys-info location
The physical location of this node:
BeiJing China
The above information represents that the physical location of this machine is:
BeiJing China.
# Display the version information of running SNMP
<SW8800> display snmp-agent sys-info version
SNMP version running in the system:
SNMPv3
The above information represents that the SNMP version running in the system is:
SNMPv3.
Syntax
display snmp-agent usm-user [ engineid engineid | group groupname |
username username ]*
View
Any view
Parameter
engineid: Displays user information with specified engine ID.
username: Displays user information with specified user name.
groupname: Displays user information of specified group.
Description
Use the display snmp-agent usm-user command to view information of all the
SNMP usernames in the group username list.
SNMP user is the remote user executing SNMP administrative operation. You can
use the snmp-agent usm-user command to specify the SNMP user.