Route-Rely - 3Com 8807 Command Reference Manual

Recursive Routing
Configuration
Commands

route-rely

30
R
ECURSIVE
Syntax
route-rely [ bgp | static ]
undo route-rely [ bgp | static ]
View
System view
Parameter
bgp: Specifies routes learned by the BGP as the type of routes to be controlled.
static: Specifies static routes as the type of routes to be controlled.
Description
Use the route-rely command to enable recursive routing.
Use the undo route-rely command to disable the recursive routing.
By default, both routes learned by the BGP and static routes support recursive
routing.
Example
# Disable recursive routing for static routes.
<SW8800>system-view
[SW8800] undo route-rely static
# Restore the default recursive routing function.
[SW8800] route-rely
Recursive Routing Configuration Commands
R C
OUTING ONFIGURATION
567