Active Region-Configuration; Check Region-Configuration - 3Com 8807 Command Reference Manual

13
MSTP Configuration
Commands
active
region-configuration
check
region-configuration
MSTP C
ONFIGURATION
Syntax

active region-configuration

View
MST region view
Parameter
None
Description
Use the active region-configuration command to activate the configurations of
MST region.
This command is used for manually activate the configurations of MST region.
Configuring the related parameters, especially the VLAN mapping table, of the
MST region, will lead to the recalculation of spanning tree and network topology
flapping. To bate such flapping, MSTP applies the configured parameters and
launches recalculation of the spanning tree only when you activate the configured
MST region parameters or enable MSTP.
After you entered this command, MSTP will apply the MST region parameters you
have configured to the system and recalculate the spanning tree.
Related command: instance, region-name, revision-level, vlan-mapping
modulo, check region-configuration.
Example
# Manually activate MST region configurations.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800]stp region-configuration
[3Com-mst-region] active region-configuration
Syntax

check region-configuration

View
MST region view
C
OMMANDS