Display Rmon History - 3Com 8807 Command Reference Manual

display rmon history

Description
Use the display rmon eventlog command to view RMON event log.
The display includes event index in the event table, the status of the event, the
time at which the event log is generated (this time starts from the system
initialization or booting and counted in milliseconds), and event description.
Example
# Show event log of RMON.
<SW8800> display rmon eventlog 1
Event table 1 owned by null is VALID.
Generates eventLog 1.1 at 0days 00h:01m:39s.
Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Generates eventLog 1.2 at 0days 00h:02m:27s.
Description: The alarm formula defined in private alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Table 131 Description on the fields of the display rmon eventlog command
Field
Event table 1
VALID
Description
less than(or =) 100 with alarm value 0
Alarm sample type is absolute
Generates eventLog 1.2 at 0days
00h:02m:27s
Syntax
display rmon history [ port-num ]
View
Any view
Parameter
port-num: Ethernet port name.
Description
Use the display rmon history command to view latest RMON history sampling
information (including utility, error number and total packet number).
Related command: rmon history.
Example
# Show the RMON history information.
<SW8800> display rmon history ethernet 2/1/1
History control entry 1 owned by null is VALID
Samples interface
Sampling interval
Latest sampled values :
Dropevents
RMON Configuration Commands
Description
Index 1 in event table
The entry corresponding to the index is valid
Event description
The alarm sample value is less than or equal to 100
The type of alarm sampling is absolute
The eventlog corresponding to the index 1.2 is
generated at 0days 00h:02m:27s.
: Ethernet2/1/1<ifEntry.642>
: 10(sec) with 10 buckets max
:0 , octets
919
:0