Display Dhcp Server Free-Ip; Display Dhcp Server Ip-In-Use - 3Com 8807 Command Reference Manual

display dhcp server
free-ip
display dhcp server
ip-in-use
Syntax

display dhcp server free-ip

View
Any view
Parameter
None
Description
Use the display dhcp server free-ip command to display the ranges of available
(unassigned) IP addresses in DHCP address pools.
Example
# Display the ranges of available (unassigned) IP addresses in DHCP address pools.
<SW8800> display dhcp server free-ip
IP Range from 1.0.0.0
IP Range from 2.2.2.3
IP Range from 4.0.0.0
IP Range from 5.5.5.0
IP Range from 5.5.5.2
Syntax
display dhcp server ip-in-use { ip ip-address | pool [ pool-name ] | interface [
vlan-interface vlan-id ] | all }
View
Any view
Parameter
ip ip-address: Specifies an IP address.
pool [ pool-name ]: Specifies a global address pool. If you do not input a
pool-name, all global address pools are included.
interface [ vlan-interface vlan-id ]: Specifies a VLAN interface address pool. If
you do not input a vlan-id, all VLAN interface address pools are included.
all: Specifies all DHCP address pools.
Description
Use the display dhcp server ip-in-use command to display information about IP
address binding in DHCP address pool(s).
Related command: reset dhcp server ip-in-use.
Example
# Display information about IP address binding in all DHCP address pools.
<SW8800> display dhcp server ip-in-use all
Global pool:
IP address Hardware address
DHCP Server Configuration Commands
to 2.2.2.1
to 2.255.255.255
to 4.255.255.255
to 5.5.5.0
to 5.5.5.255
Lease expiration Type
837