Static-Rpf-Peer; Shutdown - 3Com 8807 Command Reference Manual

MSDP Configuration Commands 651
Description
Use the reset msdp statistics command to clear statistics of one or more MSDP
peers without resetting the MSDP peer.
Example
# Clear the statistics of the MSDP peer 25.10.7.6.
<SW8800> reset msdp statistics 125.10.7.6

shutdown

Syntax
shutdown peer-address
undo shutdown peer-address
View
MSDP view
Parameter
peer-address: IP address of MSDP peer.
Description
Use the shutdown command to disable the MSDP peer specified.
Use the undo shutdown command to remove the configuration.
By default, no MSDP peer is disabled.
Related command: peer.
Example
# Disable the MSDP peer 125.10.7.6.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] msdp
[3Com-msdp] shutdown 125.10.7.6

static-rpf-peer

Syntax
static-rpf-peer peer-address [ rp-policy ip-prefix-name ]
undo static-rpf-peer peer-address
View
MSDP view
Parameter
peer-address: Address of the static RPF peer to receive SA messages.
rp-policy ip-prefix-name: Filter policy based on RP address, which filters the RP in
SA messages. If the parameter is not specified, all SA messages from static RPF
peer will be accepted. If the parameter rp-policy ip-prefix-name is specified and
filter policy is configured, the router will only accept SA messages from the RP