Display Local-Server; Display Radius - 3Com 8807 Command Reference Manual

330 C 21: AAA
HAPTER AND

display local-server

display radius

RADIUS/HWTACACS P
ROTOCOL
Description
Use the debugging radius command to enable RADIUS packet debugging.
Use the undo debugging radius command to disable RADIUS packet
debugging.
By default, RADIUS packet debugging is disabled.
Example:
# Enable RADIUS packet debugging.
<SW8800> debugging radius packet
Syntax
display local-server { statistics | nas-ip }
View
Any view
Parameter
None
Description
Use the display local-server statistics command to view the statistics of local
RADIUS scheme.
Use the display local-server nas-ip command to view the Nas-ip that is allowed
to access the Local-server.
Related command: local-server.
Example
# Display the statistics of local RADIUS scheme.
<SW8800> display local-server statistics
The localserver packet statistics:
Receive:
Discard:
Auth Reveive:
Acct Receive:
Syntax
display radius [ radius-server-name ]
View
Any view
Parameter
radius-server-name: Specifies the RADIUS scheme name with a character string
not exceeding 32 characters. Display all RADIUS scheme when the parameter is
not set.
C C
ONFIGURATION OMMANDS
0 Send:
0 Receive Packet Error:
0 Auth Send:
0 Acct Send:
0
0
0
0