Primary Authorization; Reset Hwtacacs Statistics - 3Com 8807 Command Reference Manual

360 C 21: AAA RADIUS/HWTACACS P C C
HAPTER AND ROTOCOL ONFIGURATION OMMANDS
Example
# Configure a primary authentication server.
[SW8800] hwtacacs scheme test1
[3Com-hwtacacs-test1] primary authentication 10.163.155.13 49

primary authorization

Syntax
primary authorization ip-address [ port-number ]
undo primary authorization
View
HWTACACS view
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal
format.
port-number: Port number of the server, which is in the range 1 to 65535 and
defaults to 49.
Description
Use the primary authorization command to configure a primary TACACS
authorization server.
Use the undo primary authorization command to delete the configured primary
authorization server.
By default, the IP address of the TACACS authorization server is all zeros.
You are not allowed to assign the same IP address to both primary and secondary
authorization servers.
If you repeatedly use this command, the latest configuration overwrites the
previous one.
You can remove a TACACS scheme authorization server only when no Active TCP
connection used to send authorization packets is now using the server, and the
removal impacts only packets forwarded afterwards.
Related command: display hwtacacs.
Example
# Configure a primary authorization server.
[SW8800] hwtacacs scheme test1
[3Com-hwtacacs-test1] primary authorization 10.163.155.13 49

reset hwtacacs statistics

Syntax
reset hwtacacs statistics { accounting | authentication | authorization | all }
View
User view