Reflector Cluster-Id - 3Com 8807 Command Reference Manual

678 C 38: MBGP M E C C
HAPTER ULTICAST XTENSION ONFIGURATION OMMANDS
View
User view
Parameter
all: Refreshes multicast sub-address family router of all peer .
peer-address: Multicast sub-address family router of the specified address peer.
group-name: Multicast sub-address family router of all members of the specified
peer group.
import: Sends ROUTE-REFRESH packets, request the peer to send all multicast
sub-address family router again .
export: Sends all multicast sub-address family router again .
Description
Use the refresh bgp multicast command to request the peer to send multicast
sub-address family router again, or send multicast sub-address family router again.
Example
# Request all the peers to send multicast sub-address family router again.
<SW8800> refresh bgp all multicast import

reflector cluster-id

Syntax
reflector cluster-id { cluster-id | address }
undo reflector cluster-id
View
IPv4 multicast sub-address family view
Parameter
cluster-id: Route reflector cluster ID, in integer number or IP address format, range
1 to 4294967295.
address: Route reflector cluster ID in IP address format.
Description
Use the reflector cluster-id command to configure route reflector cluster ID.
Use the undo reflector cluster-id command to delete route reflector cluster ID.
By default, each route reflector uses its own route ID as cluster ID.
In general, one cluster has only one route reflector, and then the router ID for the
route reflector can be used to identify the cluster. If a cluster has several route
reflectors, for multiple route reflectors can improve network stability, then you can
use this command to specify the same cluster ID for them all.
Related command: reflect between-clients and peer reflect-client.