Display Rmon Alarm - 3Com 8807 Command Reference Manual

54
RMON Configuration
Commands

display rmon alarm

RMON C
ONFIGURATION
Syntax
display rmon alarm [ alarm-table-entry ]
View
Any view
Parameter
alarm-table-entry: Alarm table entry index.
Description
Use the display rmon alarm command to view RMON alarm information.
Related command: rmon alarm.
Example
# Display the RMON alarm information.
<SW8800> display rmon alarm
Alarm table 1 owned by monitor is VALID.
Samples type
Variable formula
Description
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value
Table 129 Description on the fields of the display rmon alarm command
Field
Alarm table 1
monitor
VALID
Samples type
Variable formula
Description
Sampling interval
Rising threshold is 1000
Falling threshold is 100
: delta
: 1.3.6.1.2.1.16.1.1.1.3.1<etherStatsDropEvents.1>
: Ethernet5/1/1
: 10(sec)
: 10(linked with event 1)
: 2(linked with event 1)
: risingOrFallingAlarm
: 0
Description
Index 1 in alarm table
Owner
The alarm entry corresponding to this index is valid.
Type of sampling
Variable parameters
Description information
Time interval for sampling
The rising threshold is 1000.
The falling threshold is 100.
C
OMMANDS