Share Descriptors - 3Com 8807 Command Reference Manual

QoS Commands 273
tc-index index: Index value of traffic conditioner, ranging from 0 to 12288. If you
configured the same index value to different traffic rules during traffic statistic
configuration, then the statistic of these traffics is performed.
Description
Use the traffic-statistic command to activate an ACL and run traffic statistics
(only available for the permitted rules in the ACL).
Use the undo traffic-statistic command to cancel traffic statistics.
The traffic-statistic command only counts the hardware matching times in
packet forwarding. You can view the statistics using the display qos-interface
traffic-statistic commands.
n
Use the traffic-statistic command in port group view to make statistics of traffic
information of all the ports in the port group.
Related command: display qos-interface traffic-statistic.
Example
# Run traffic statistics for the packets which match the permitted rules in the ACL
2000.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800]interface e thernet3/1/1
[3Com-Ethernet3/1/1] traffic-statistic inbound ip-group 2000

share descriptors

Syntax
share descriptors slotid
undoshare descriptors slotid
View
System view
Parameter
slotid: Slot ID of a card.
Description
Use the share descriptors command to enable the descriptor share function.
Use the undo share descriptors command to disable the descriptor share
function.
The descriptor share function is disabled by default.
Example
# Enable descriptor share on No.3 card.
<SW8800>system-view
System View: return to User View with Ctrl+Z. [SW8800] share descriptors 3