Display Mpls Ldp Interface - 3Com 8807 Command Reference Manual

692 C 39: MPLS B
HAPTER
display mpls ldp
interface
C C
ASIC ONFIGURATION OMMANDS
-----------------------------------------------------------------
Buffer no error.
Syntax
display mpls ldp interface [ | begin text | exclude text | include text ]
View
Any view
Parameter
|: Displays matched outputs.
begin: Displays the outputs matching the regular expression from the first line.
exclude: Displays the outputs excluding those lines matching the regular
expression.
include: Displays only those outputs matching the regular expression.
text: Contents of the regular expression.
Description
Use the display mpls ldp interface command to display information of the
interface with LDP enabled and in the Up state.
Related command: mpls ldp enable and display mpls ldp session.
Example
# Display the information of the interface with LDP enabled and in the UP state.
<3Com-Ethernet3/1/0> display mpls ldp interface
Displaying information about all Ldp interface:
Interface Vlan-interface12(address=12.12.12.2):
Label distributing enabled,bound to entity:2.2.2.2:0
Generic label range configured:16 -
Label Advertisement Mode: Downstream-Unsolicited
Configured KeepAlive hold time:60, Configured Hello hold time:15
Negotiated Hello hold time:15
Hello packets sent/rcv:21158/21136
Interface Vlan-interface21(address=21.21.21.2):
Label distributing enabled,bound to entity:2.2.2.2:0
Generic label range configured:16 -
Label Advertisement Mode: Downstream-Unsolicited
Configured KeepAlive hold time:60, Configured Hello hold time:15
Negotiated Hello hold time:0
Hello packets sent/rcv:16929/0
Interface Vlan-interface22(address=22.22.22.2):
Label distributing enabled,bound to entity:2.2.2.2:0
Generic label range configured:16 -
Label Advertisement Mode: Downstream-Unsolicited
Configured KeepAlive hold time:60, Configured Hello hold time:15
Negotiated Hello hold time:15
Hello packets sent/rcv:21175/21159
44800
44800
44800