Idle-Cut - 3Com 8807 Command Reference Manual

AAA Configuration Commands 317
The purpose of introducing ISP domain settings is to support the application
environment with several ISP domains. In this case, an access device may have
supplicants from different ISP domains. Because the attributes of ISP users, such as
username and password structures, service types, may be different, it is necessary
to separate them by setting ISP domains. In ISP domain view, you can configure a
complete set of exclusive ISP domain attributes for each ISP domain, which
includes AAA schemes ( RADIUS scheme group applied and so forth.)
For a switch, each supplicant belongs to an ISP domain. The system supports to
configure up to 16 ISP domains.
When this command is used, if the specified ISP domain does not exist, the system
will create a new ISP domain. All the ISP domains are in the active state when
they are created.
Related command: access-limit, radius scheme, state, display domain.
Example
# Create a new ISP domain, 3com163.net, and enters its view.
[SW8800] domain 3com163.net
New Domain added.
[3Com-isp-3com163.net]

idle-cut

Syntax
idle-cut { disable | enable minute flow }
View
ISP domain view
Parameter
disable: means disabling the user to use idle-cut function.
enable: means enabling the user to use idle-cut function.
minute: Specifies the maximum idle time, ranging from 1 to 120 and measured in
minutes.
flow: Minimum data traffic, ranging from 1 to 10,240,000 and measured in bytes.
Description
Use the idle-cut command to configure the user template in the current ISP
domain.
By default, after an ISP domain is created, this attribute in user template is
disable, that is, the user Idle-cut is disabled.
The user template is a set of default user attributes. If a user requesting for the
network service does not have some required attributes, the corresponding
attributes in the template will be endeavored to him as default ones. The user
template of the switch you are using may only provide user Idle-cut settings. After
a user is authenticated, if the Idle-cut is configured to enable or disable by neither