Shutdown; Trap-To-Cpu Disable - 3Com 8807 Command Reference Manual

VLAN Configuration Commands 81
Example
# Name the current VLAN 2 "hello".
[3Com-vlan2] name hello

shutdown

Syntax
shutdown
undo shutdown
View
VLAN interface view
Parameter
None
Description
Use the shutdown command to disable the VLAN interface.
Use the undo shutdown command to enable the VLAN interface.
By default, when all the Ethernet ports in a VLAN are in the Down state, this VLAN
interface is also Down. When there are one or more Ethernet ports in the Up state,
this VLAN interface is also Up.
This command can be used to start interface after the related parameters and
protocols of VLAN interface are set. Or when the VLAN interface fails, the
interface can be shut down first and then restarted. In this way, the interface may
be restored to normal status.
Shutting down or bringing up a VLAN interface will not affect any Ethernet port of
this VLAN.
Example
# Shut down Vlan-interface 2.
[3Com-Vlan-interface1] shutdown

trap-to-cpu disable

Syntax
trap-to-cpu disable
undo trap-to-cpu disable
View
VLAN view
Parameter
None
Description
Use the trap-to-cpu disable command to move the CPU port out of a VLAN.