Display Qos-Interface Traffic-Limit - 3Com 8807 Command Reference Manual

display qos-interface
traffic-limit
Description
Use the display qos-interface queue-scheduler command to view queue
scheduling mode and parameters of a port. If no port is specified, queue
scheduling mode and the parameters of all ports will be displayed.
Related command: queue-scheduler.
Example
# Display queue scheduling mode and parameters.
<SW8800> display qos-interface queue-scheduler
Ethernet5/1/1 Port scheduling:
QID: scheduling-group
-----------------------------------
0 : sp
1 : sp
2 : sp
3 : wrr , group1
4 : sp
5 : wrr , group2
6 : sp
7 : sp
Ethernet5/1/ Port scheduling:
QID: scheduling-group
-----------------------------------
0 : sp
1 : sp
2 : sp
3 : sp
4 : sp
5 : sp
6 : sp
...
Syntax
display qos-interface [ interface -type interface-number ] traffic-limit
View
Any view
Parameter
interface-type interface-number: Port of the switch, for detailed description,
please refer to Command Manual - Port.
Description
Use the display qos-interface traffic-limit command to view the parameter
setting of traffic rate limitation, including the target ACL, committed average rate,
committed burst size (CBS), maximum burst size (MBS), peak rate and the related
monitoring actions etc.
Related command: traffic-limit.
weight
0
0
0
25
0
30
0
0
weight
0
0
0
0
0
0
0
QoS Commands 239