Display Ip Routing-Table Ip-Address - 3Com 8807 Command Reference Manual

display ip routing-table
ip-address
Table 49 Description of the fields of the display ip routing-table acl verbose command
Field
Age Lifetime of a route entry, in hh : mm : ss, where hh is hours, mm is minutes, and
ss is seconds. The displayed time should be read from right to left. For example,
7:24 indicates that the lifetime of a route is seven hours and 24 minutes.
Cost Value of the cost
Tag Route tag
Syntax
display ip routing-table ip-address [ mask ] [ longer-match ] [ verbose ]
View
Any view
Parameter
ip-address: Destination IP address, in dotted decimal format.
mask: IP address mask, length in dotted decimal notation or integer. It ranges from
0 to 32 when it is expressed with integer.
longer-match: Address route matching the destination address in natural mask
range.
verbose: With the verbose argument, this command displays the verbose
information of both the Active and Inactive routes. Without the parameter, this
command only displays the summary of Active routes.
Description
Use the display ip routing-table ip-address command to view the routing
information of the specified destination address.
With different parameters, the output of command is different. The following is
the output description for different forms of this command:

display ip routing-table ip-address

■
If destination address, ip-address, has corresponding route in natural mask range,
this command will display all subnet routes or only the route best matching the
destination address, ip-address, is displayed. And only the Active matching route is
displayed.
display ip routing-table ip-address mask,
■
This command only displays the route fully matching with specified destination
address and mask.
display ip routing-table ip-address longer-match
■
This command displays all destination address route matching with destination
address in natural mask range.
Display Commands of the Routing Table
Description
385