Display Mpls Ldp Session - 3Com 8807 Command Reference Manual

696 C 39: MPLS B
HAPTER

display mpls ldp session

C C
ASIC ONFIGURATION OMMANDS
By default, you can view all the Remote-peer configurations.
Related command: mpls ldp remote-peer and remote-ip.
Example
# Display the Remote-peer configuration.
<SW8800> display mpls ldp remote
Displaying information about all Ldp Remote Peers:
Remote Index: 1
Peer Address: 1.1.1.1
Configured KeepAlive hold time:60, Configured Hello hold time:45
Negotiated Hello hold time:45
Hello packets sent/rcv:6515/6509
Remote Index: 3
Peer Address: 3.3.3.3
Configured KeepAlive hold time:60, Configured Hello hold time:45
Negotiated Hello hold time:45
Hello packets sent/rcv:6457/6453
Remote Index: 4
Peer Address: 1.1.0.3
Configured KeepAlive hold time:60, Configured Hello hold time:45
Negotiated Hello hold time:0
Hello packets sent/rcv:0/0
Remote Index: 7
Peer Address: 1.1.1.7
Configured KeepAlive hold time:60, Configured Hello hold time:45
Negotiated Hello hold time:0
Hello packets sent/rcv:0/0
Syntax
display mpls ldp session [ | begin text | exclude text | include text ]
View
Any view
Parameter
|: Displays matched outputs.
begin: Displays the outputs matching the regular expression from the first line.
exclude: Displays the outputs excluding those lines matching the regular
expression.
include: Displays only those outputs matching the regular expression.
text: Contents of the regular expression.
Description
Use the display mpls ldp session command to know the session between peer
entities.
Transport Address: 2.2.2.2
Transport Address: 2.2.2.2
Transport Address: 2.2.2.2
Transport Address: 2.2.2.2