Rip Metricin; Rip Metricout - 3Com 8807 Command Reference Manual

RIP Configuration Commands 407

rip metricin

Syntax
rip metricin value
undo rip metricin
View
Interface view
Parameter
value: Additional route metric added when an interface receives a packet, ranging
from 0 to 16. By default, the value is 0.
Description
Use the rip metricin command to configure the additional route metric added to
the route when an interface receives RIP packets.
Use the undo rip metricin command to restore the default value of this
additional route metric.
Related command: rip metricout.
Example
# Specify the additional route metric to 2 when the interface Vlan-interface 10
receives RIP packets.
[SW8800] interface Vlan-interface 10
[3Com-Vlan-interface10] rip metricin 2

rip metricout

Syntax
rip metricout value
undo rip metricout
View
Interface view
Parameter
value: Additional route metric added when an interface transmits a packet,
ranging from 1 to 16. By default, the value is 1.
Description
Use the rip metricout command to configure the additional route metric to the
route when an interface transmits RIP packets.
Use the undo rip metricout command to restore the default value of this
additional route metric.
Related command: rip metricin.
Example
# Set the additional route metric to 2 when the interface Vlan-interface 10
transmits RIP packets.