Apply Tag - 3Com 8807 Command Reference Manual

552 C 28: IP R P C C
HAPTER OUTING OLICY ONFIGURATION OMMANDS
View
Route policy view
Parameter
igp: Sets the BGP route information source as internal route.
egp: Sets the BGP route information source as external route
as-number: Specifies AS number of external route.
incomplete: Sets the BGP route information source as unknown source.
Description
Use the apply origin command to configure to apply the route source.
Use the undo apply origin command to cancel the Apply sub-statement.
Related command: if-match interface, if-match acl, if-match ip-prefix,
if-match ip next-hop, if-match cost, if-match tag, route-policy, apply ip
next-hop, apply local-preference, apply cost, apply tag.
Example
# Define an Apply sub-statement. When it is used for setting route information
attribute, it sets the route source of BGP route information as IGP.
[3Com-route-policy] apply origin igp

apply tag

Syntax
apply tag value
undo apply tag
View
Route policy view
Parameter
value: Specifies the tag value of route information.
Description
Use the apply tag command to configure to set the tag area of OSPF route
information. Use the undo apply tag command to cancel the Apply
sub-statement.
Related command: if-match interface, if-match acl, if-match ip-prefix,
if-match ip next-hop, if-match cost, if-match tag, route-policy, apply ip
next-hop, apply local-preference, apply cost, apply origin.
Example
# Define one Apply sub-statement. When it is used for setting route information
attribute, it sets the tag area of route information as 100.
[3Com-route-policy] apply tag 100