Refresh Bgp - 3Com 8807 Command Reference Manual

BGP Configuration Commands 541
address: Used as the interface address of the route reflector's cluster ID.
Description
Use the reflector cluster-id command to configure the cluster ID of the route
reflector.
Use the undo reflector cluster-id command to delete the cluster ID of the route
reflector.
By default, each route reflector uses its Router ID as the cluster ID.
Usually, there is only one route reflector in a cluster. In this case, the cluster is
identified by the router ID of the route reflector. You can configure multiple route
reflectors to improve network stability. If there are multiple route reflectors, you
can use this command to configure the same cluster ID for all these route
reflectors.
Related command: reflect between-clients, peer reflect-client.
Example
# Set the cluster ID of the route reflector as 80.
[3Com-bgp] reflector cluster-id 80
[3Com-bgp] peer 172.38.160.10 reflect-client

refresh bgp

Syntax
refresh bgp { all | peer-address | group group-name } [ multicast | vpn-instance
instance-name | vpnv4 ] { import | export }
View
User view
Parameter
all: Resets all the connections with BGP.
peer-address: Resets the connection with a specified BGP peer.
group-name: Resets the connection with a specified BGP peer group.
import: Requests the peer for all its routes by sending Route-refresh packets to
the peer.
export: Refreshes routes advertised to the peers.
multicast: Refreshes multicast routes.
vpn-instance: VPN instance route.
vpnv4: VPNv4 route.
Description
Use the refresh bgp command to request the peers to refresh the routes.