Display Ospf Routing - 3Com 8807 Command Reference Manual

434 C 25: OSPF C
HAPTER

display ospf routing

C
ONFIGURATION OMMANDS
Table 65 Description of the fields of the display ospf retrans-queue command
Field Description
RouterID Router ID of neighbor router
Address Address of the interface, through which neighbor routers communicate with the
router
Interface Address of the interface on the network segment
Area Number of an OSPF area
Type Type of the LSA
LSID Link State ID of the LSA
AdvRouter Router ID of the router originating the LSA
Syntax
display ospf [ process-id ] routing
View
Any view
Parameter
process-id: ID of an OSPF process. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf routing command to view information about the OSPF
routing table.
Example
# View the OSPF routing table.
<SW8800> display ospf routing
OSPF Process 1 with Router ID 1.1.1.1
Routing Tables
Routing for Network
Destination
10.110.0.0/16
10.10.0.0/16
Total Nets: 2
Intra Area: 2
Table 66 Description of the fields of the display ospf routing command
Field
Destination
Cost
Type
NextHop
AdvRouter
Area
Intra Area
Inter Area
ASE
Cost Type NextHop
1 Net 10.110.10.1
1 Stub 10.10.0.1
Inter Area: 0 ASE: 0
Description
Destination network segment
Cost of route
Type of route
Next hop of route
Router ID of the router advertising the route
Area ID
Number of intra-area routes
Number of inter-area routes
Number of external routes
AdvRouter
1.1.1.1
3.3.3.3
NSSA: 0
Area
0
0