Key Number Assignments - Nortel 1110 Installation And Operation Manual

Page 84 of 630
Information line display
Soft key label display

Key number assignments

553-3001-368 Standard 26.00
Nortel IP Phone 2004
Note: If a label is longer than ten characters, the last ten characters are
displayed, and the excess characters are deleted from the beginning of the
string.
An IP Phone 2004 has a three-line information display area with the
following information:
• caller number
• caller name
• feature prompt strings
• user-entered digits
• date and time information (if the IP Phone is in an idle state) or Call
Timer (if provisioned in the Telephone options menu)
The information in the display area changes, according to the call processing
state and active features.
The soft key label has a maximum six characters. Each soft key includes the
soft key label and an icon. When a soft key is in use, a triangle icon displays
at the beginning of the soft key label, and the label shifts one character to the
right. (If the label is six characters long, the last or rightmost character is
truncated.) If a feature is enabled, the icon state turns to On. It remains in the
on state until the feature key is pressed again. This cancels the enabled feature
and turns the icon off, returning the soft key label to its original state.
Use the More soft key to navigate through the layers of functions. If there are
only four functions assigned to the soft keys, the More key does not appear
and all four functions are displayed.
A maximum of nine functions can be assigned to the four soft-labeled,
predefined soft keys. Because they are pre-defined, the user cannot change
August 2007