Nortel 1110 Installation And Operation Manual page 329

4 Enter the following information:
Screen prompt
set IP
net msk
def gw
5 Enter the information for the primary Connect Server (S1) and the
secondary Connect Server (S2):
S1 IP
S1 Port
S1 action
S1 retry count
Nortel IP Phone 1110
Description
A valid IP Phone 1110 IP address.
A subnet mask.
The default Gateway for the IP
Phone 1110 on the LAN segment
to which the IP Phone 1110 is
connected.
The primary CS 1000 node IP
address for the IP Phone 1110.
This is a fixed value: 4100
Choose one of the following:
• for TPS only, enter 1
• for TPS and Secure Media
Controller, enter 6 or 1
For more information about
Secure Media Controller, see
Secure Media Controller:
Implementation Guide (553-3001-
225).
Note: You are not prompted for
S1 PK if S1 Action is set to 1.
The number of times the IP Phone
1110 to connect to the server.
Enter 10.
IP Phones Description, Installation, and Operation
Page 329 of 630