Nortel 1110 Installation And Operation Manual page 596

Page 596 of 630
Table 73
1140e.cfg field name definitions (Part 1 of 2)
Field name
[FW]
DOWNLOAD_MODE
VERSION
FILENAME
PROTOCOL
553-3001-368 Standard 26.00
Appendix G: Bluetooth wireless technology
If administrative control is not retrieved, the previously received value is
used. If no value has ever been retrieved, then Bluetooth wireless
technology is disabled by default.
If the IP Phone 1140E successfully retrieves the administrative control
and enables Bluetooth wireless technology, 3. Bluetooth Setup appears
in the Preferences menu.
5 Configure the IP Phone 1140E with a TFTP Server IP address so the
IP Phone can access the TFTP Server.
6 Press the Services key twice.
7 Press 3 on the dialpad to access the Network Configuration menu or
use the Up/Down navigation keys to scroll and highlight the Network
Configuration option. Press Enter.
8 Enter the TFTP IP address in the TFTP IP field.
9 Press the Apply&Reset soft key.
Table 73 lists the 1140e.cfg field names and definitions.
Field value
AUTO
0625Cxx
0625Cxx.bin
TFTP
August 2007
End of Procedure
Definition
Section header for firmware download information
Recommended setting. FW is downloaded when
the IP Phone's FW version is older than the value
in the 1140e.cfg file's VERSION field.
FW version
image file name, must match the file name of the
FW file
Download protocol must be TFTP