Nortel 1110 Installation And Operation Manual page 95

6 Enter the information for the primary Connect Server (S1) and the
secondary Connect Server (S2):
Screen prompt
S1 IP
S1 Port
S1 action
S1 retry count
S1 PK
S2 IP
Nortel IP Phone 2004
Description
The primary CS 1000 node IP
address for the IP Phone 2004.
This is a fixed value: 4100
Choose one of the following:
• for TPS only, enter 1
• for TPS and Secure Media
Controller, enter 6 or 1
For more information about Secure
Media Controller, see Secure Media
Controller: Implementation Guide
(553-3001-225).
Note: You are not prompted for S1
PK if S1 Action is set to 1.
The number of times the IP Phone
2004 attempts to connect to the
server. Enter 10.
Default is ffffffffffffffff.
The Private key of the SMC to which
the IP Phone is connected.
If you are using a Secure Media
Controller, do the following:
• Set to 6 or 1.
• Enter a 16-digit hexadecimal
number.
The secondary CS 1000 node IP
address for the IP Phone 2004.
IP Phones Description, Installation, and Operation
Page 95 of 630