Nortel 1110 Installation And Operation Manual page 180

Page 180 of 630
553-3001-368 Standard 26.00
Nortel IP Phone 2007
Retry—the number of times the IP Phone 2007 attempts to connect to the
server
17 Use the Right navigation key to scroll and highlight S1 PK. Use the
dialpad to fill in the information.
S1 PK—the Private key of the Secure Media Controller to which the IP
Phone is connected
18 Press the Enter key to start the edit mode. Use the dialpad to fill in the
information. Enter 6 or 1. This value depends on the S1 Action
configuration.
19 Press the Enter key to start the edit mode. Use the dialpad to fill in the
information. You must enter a 16-digit hexadecimal number. The default
is ffffffffffffffff.
For more information about Secure Media Controller, see Secure Media
Controller: Implementation Guide (553-3001-225).
20 Use the Right navigation key to scroll and highlight S2 IP. Use the dialpad
to fill in the information.
S2 IP—the secondary CS 1000 node IP address for IP Phone 2007
Note: IP Phone 2007 can support a primary (S1) and secondary (S1)
connect server. If you require IP Phones to register on multiple nodes, see
IP Line: Description, Installation, and Operation (553-3001-365).
21 Use the Right navigation key to scroll and highlight Port. Use the dialpad
to fill in the information.
Port—same as S1 port
22 Use the Right navigation key to scroll and highlight S2 Action. Press the
Enter key to start the edit mode. Use the dialpad to fill in the information.
Choose one of the following:
• for TPS only, enter 1
• for TPS and Secure Media Controller, enter 6 or 1
For more information about Secure Media Controller, see Secure Media
Controller: Implementation Guide (553-3001-225).
23 Use the Right navigation key to scroll and highlight Retry. Use the
dialpad to fill in the information.
Retry—same as S1
24 Use the Right navigation key to scroll and highlight S2 PK.
August 2007