Nortel 1110 Installation And Operation Manual page 589

Appendix F: Configuring the Local Tools menu
4. DHCP Secure Mode
The IP Phone follows the menu lock configuration received from the Full
DHCP string:
• if SECUREMENU is present, you are prompted to enter a password after
you double-press the Services key
• if PARTSECURE is present, you are prompted to enter a password
whenever you select Local Diagnostics and Network Configuration
• if neither SECUREMENU nor PARTSECURE is present, then the menu
is not locked
For information about Password Protection of the Local Tools menu in the
applicable IP Phone section.
5. Lock Now
The Lock Now item immediately exits the Tools menu, closes any open Tools
menu pages, and locks the Tools menu.
Procedure 122
Locking the Tools menu
1 Press the Services key twice.
2 Press 4 on the dialpad to access the Lock Menu item or use the Up/Down
navigation keys to scroll and highlight the Lock Menu options.
3 Press the Select soft key.
Procedure 123
Unlocking the Tools menu
1 Press the Services key twice.
2 Enter the password 26567*738 (color*set) in the prompt window.
3 The Tools menu is unlocked, and will remain active for five minutes.
End of Procedure
End of Procedure
IP Phones Description, Installation, and Operation
Page 589 of 630