Nortel 1110 Installation And Operation Manual page 289

Nortel networks communication server 1000 release 4.5
Hide thumbs Also See for 1110:
Table of Contents

Advertisement

Nortel IP Audio Conference Phone 2033
Cfg XAS? (0-No,1-Yes)
EAP Enable? (0-No, 1-Yes)
Cfg PK (0-No, 1-Yes):0
Duplex (0-Auto, 1-Full):0
Note: You are prompted to enter the TFTP Server IP address if you are
using a TFTP Server to download the current firmware. For CS 1000
Release 4.5, accept the default value of 0.0.0.0. For Succession Release
3.0 or CS 1000 Release 4.0, enter the TFTP Server IP address. The
IP Phone searches for the TFTP Server for firmware upgrade. If the file
name specified in configuration file is not the same as the current
2-Au
Enter a VLAN ID automatically. This
prompt exists to support future
implementation of DHCP.
VLANFILTER (0-No, 1-Yes)
Default 0 (for No)
You are not prompted for
VLANFILTER if VLAN is not enabled.
Enter 0 (for No), since External
Application Server is not supported
on the IP Audio Conference Phone
2033.
This prompt exists to support future
implementation of External
Application Server.
Default 0 (for No)
You are not prompted to enter Device
ID and Password if you select 1 for
Yes.
For more information on EAP, see
Appendix Appendix C:: "802.1x Port-
based network access control" on
page
521.
Default 0 (for No)
Default 0 (for Auto)
IP Phones
Description, Installation, and Operation
Page 289 of 630

Advertisement

Table of Contents
loading

Table of Contents