Nortel 1110 Installation And Operation Manual page 174

Page 174 of 630
553-3001-368 Standard 26.00
Nortel IP Phone 2007
a. Connect one end of the handset cord to the handset jack on the back
of the IP Phone (identified with a handset icon).
b. Connect the other end of the handset cord to the handset.
4 Choose one of the following connections:
• For an IP Phone not sharing a LAN access with a PC:
Connect one end of the CAT5 Ethernet cable to the LAN Ethernet
port located on the back of the IP Phone (identified with a LAN icon).
Plug the other end of the CAT5 Ethernet cable into the IP network.
• For an IP Phone sharing a LAN access with a PC:
Connect one end of the CAT5 Ethernet cable to the LAN Ethernet
port located on the back of the IP Phone (identified with a LAN icon,
see Figure 13 on
Insert one end of a second CAT5 Ethernet cable into the PC Ethernet
port located on the back of the IP Phone (identified with a PC icon,
see Figure 13 on
Ethernet port.
5 Secure the IP Phone footstand to the base of the IP Phone. Use the angle
adjustment grip on the top back of the IP Phone to adjust the position.
CAUTION
Damage to Equipment
Do not plug any device into your IP Phone 2007
Ethernet port other than one PC. The IP Phone 2007
does not support multiple devices connected through
the PC Ethernet port.
August 2007
page 175) and the other end to the IP network.
page 175) and the other end into the computer's