Nortel 1110 Installation And Operation Manual page 371

Startup sequence
Table 43
IP Phone 1120E IP parameters (Part 1 of 2)
Parameter
VLAN ID
IP Address
Net Mask
Default Gateway Address
10 Replace the stand cover. Ensure that all cables are neatly routed and
press the stand cover into place until you hear a click.
11 Put the phone in the wall-mount position (optional). If you wall-mount the
phone, put it in the wall-mount position by holding the Tilt Lever and press
the phone towards the base until the phone is parallel with the base.
Release the Tilt Lever and continue to push the phone towards the base
until you hare an audible click. Ensure the phone is securely locked in to
position.
When an IP Phone 1120E is connected to the network, it must perform a
startup sequence. The elements of the startup sequence include:
• obtaining VLAN ID (if supported by the network infrastructure)
• obtaining the IP parameters
• connecting to the Call Server
• obtaining a User ID
See Table 43 for a summary of the IP parameters and how they are obtained.I
Method of acquisition
Manually entered or automatically obtained through
DHCP, and LLDP.
Manually entered or automatically obtained through
Partial or Full DHCP.
Manually entered or automatically obtained through
Partial or Full DHCP.
Manually entered or automatically obtained through
Partial or Full DHCP.
Nortel IP Phone 1120E
IP Phones Description, Installation, and Operation
Page 371 of 630