Nortel 1110 Installation And Operation Manual page 358

Page 358 of 630
Soft key label display
553-3001-368 Standard 26.00
Nortel IP Phone 1120E
• User-entered digits
• Date and time information (if the IP Phone is in an idle state) or Call
Timer (if provisioned in the Telephone options menu)
The information in the display area changes, according to the call processing
state and active features.
Because the IP Phone 1120E only has a single-line information display area,
you are prompted to scroll through any additional lines of information. For
example, during an incoming call, only the Directory Number (DN) appears
if the caller name is greater than 10 characters. Press the flashing arrow to
display the caller name.
The soft key label has a maximum of seven characters. Each soft key includes
the soft key label and an icon. When a soft key is in use, a triangle icon
displays at the beginning of the soft key label, and the label shifts one
character to the right. (If the label is six characters long, the last or rightmost
character is truncated.) If a feature is enabled, the icon state turns to On. It
remains in the on state until the feature key is pressed again. This cancels the
enabled feature and turns the icon off, returning the soft key label to its
original state.
Use the More soft key to navigate through the layers of functions. If only four
functions are assigned to the soft keys, the More key does not appear and all
four functions are displayed.
August 2007