Nortel 1110 Installation And Operation Manual page 88

Page 88 of 630
Before you begin
First-time installation
553-3001-368 Standard 26.00
Nortel IP Phone 2004
• Startup sequence
• Installing the IP Phone 2004
Before installing the IP Phone 2004, complete the following pre-installation
checklist:
• Ensure there is one IP Phone 2004 boxed package for each
IP Phone 2004 being installed. The package contains:
— IP Phone 2004
— handset
— handset cord
— 2.1 m (7 ft) CAT5 Ethernet cable
— Getting Started Card
• Ensure there is one Software License for each IP Phone 2004 being
installed.
• Ensure the host Call Server is equipped with the Voice Gateway Media
Card, or a Signaling Server with the Line TPS application.
• If an AC power adapter is required, ensure the correct AC power
transformer is used. The voltage rating of the transformer must match the
wall outlet voltage. See Table 8, "IP Phone 2004 component list," on
page 86.
You must first install an IP Telephony Node with the Communication Server.
For information about installing an IP Telephony Node, see Signaling Server:
Installation and Configuration (553-3001-212), or IP Line: Description,
Installation, and Operation (553-3001-365).
CAUTION
Do not plug your IP Phone 2004 into an ISDN
connection. Severe damage can result.
August 2007