Nortel 1110 Installation And Operation Manual page 229

Note: Before performing a new installation or an upgrade, check the
version of IP Softphone 2050 software.
Before you upgrade an IP Softphone 2050, record the information
found in the Server window. This information may required in the
future.
Use Procedure 35 on
IP Softphone 2050.
Procedure 35
Installing the IP Softphone 2050 on the PC
(new installation)
1 Insert the CD-ROM disk into the CD-ROM drive of your PC.
Note: Installation should proceed automatically. If it does not, then
continue with step 2, otherwise go to step 5.
2 Double-click the My Computer icon.
3 Double-click the CD icon.
4 Double-click the Setup icon.
5 Follow the instructions on-screen to complete the installation.
6 Select Start > Programs > Nortel > IP Softphone 2050 to start the
IP Softphone 2050 application.
7 Select Settings to assign a server address, select sound devices, and
select a server type.
Note: If you are installing the IP Softphone 2050 on a Windows XP or
Windows 2000 platform, you must install the Windows QoS Packet
Scheduler. See Procedure 40 on page 232.
Use Procedure 36 on
Nortel IP Softphone 2050
IMPORTANT!
page 229 for a new installation of the
End of Procedure
page 230 to upgrade the IP Softphone 2050 on the PC.
IP Phones Description, Installation, and Operation
Page 229 of 630