Nortel 1110 Installation And Operation Manual page 89

Configuring the IP Phone 2004
Procedure 9 to configure the IP Phone 2002 for the first time.
Procedure 9
Configuring the IP Phone 2004
1 Configure a virtual loop on the Call Server using LD 97.
For more information about configuring a virtual loop, see IP Line:
Description, Installation, and Operation (553-3001-365), and Software
Input/Output: Administration (553-3001-311).
2 Configure the IP Phone 2004 on the Call Server using LD 11.
For more information, see Software Input/Output: Administration (553-
3001-311).
3 Connect the IP Phone 2004 components:
a. Connect one end of the handset cord to the handset jack on the back
of the IP Phone (identified with a handset icon).
b. Connect the other end of the handset cord to the handset.
4 Choose one of the following connections:
• For an IP Phone not sharing a LAN access with a PC:
Connect one end of the CAT5 Ethernet cable to the LAN Ethernet
port located on the back of the IP Phone 2004 (identified with a LAN
icon). The other end of the CAT5 Ethernet cable plugs into the IP
network.
Nortel IP Phone 2004
IP Phones Description, Installation, and Operation
Page 89 of 630