Nortel 1110 Installation And Operation Manual page 272

Page 272 of 630
Features not currently supported
553-3001-368 Standard 26.00
Nortel IP Audio Conference Phone 2033
• DTMF Tones
The IP Audio Conference Phone 2033 supports the following data network
features:
• 10/100 Mbps Full Duplex mode
• automatic network configuration through DHCP
For more information about automatic network configuration, see
Table 33, "IP Audio Conference Phone 2033 IP parameters," on
page 284.
• 802.1Q VLAN and 802.1p priority support, industry standards for
managing bandwidth usage
— VLAN filtering which allows the IP Phone to only see Voice VLAN
traffic. The integrated switch will pass DATA VLAN traffic to the
PC Ethernet port. This prevents the Data VLAN broadcast traffic
from reaching the IP Phone. For more information, see
Appendix Appendix B:: "802.1Q VLAN description" on
and Data Networking for Voice over IP (553-3001-160).
• 802.1x Port-based network access control, industry standard for passing
Extensible Authentication Protocol (EAP) over a LAN
For more information about 802.1x port-based network access control,
see Appendix Appendix C:: "802.1x Port-based network access control"
on page 521.
• integrated hardware to support Power over Ethernet (PoE) for IEEE
802.3af Power Classification 0
The IP Audio Conference Phone 2033 supports the following languages:
English, French, Swedish, Danish, Norwegian, German, Dutch,
Portuguese, Czech, Finnish, Hungarian, Italian, Polish, Spanish,
Japanese, Russian, Latvian, Turkish
• External three-port switch to support sharing LAN access with a PC or
other data device is not provided. However, the IP Audio
Conference Phone 2033 does provide 100 Mbps full-duplex support.
August 2007
page 511