Accessing The Local Tools Menu - Nortel 1110 Installation And Operation Manual

–
— 5. Lock Now—The Lock Now item immediately exits the Tools
menu, closes any open Tools menu pages, and locks the Tools menu.
The settings configured in the Lock Menu sub menu override the settings
received from the DHCP string.
Configuring Secure Local Menu through Full DHCP
Password protection is enabled during Full DHCP configuration if the
SECUREMENU parameter, or the PARTSECURE parameter are present at
the end of the S4 part of the Full DHCP string. If neither the SECUREMENU
parameter, nor the PARTSECURE parameter is present, password protection
is not enabled.
The SECUREMENU/PARTSECURE item is an optional parameter. If it is
present, then the full S4 string needs to be present, including the action and
retries. The S4 string will already be present if the XAS support has been
configured through the DHCP. If XAS is not configured, you can still enable
password protection by setting the S4 IP address to 0.0.0.0 and by setting the
other fields to 0.
With Full DHCP, the vendor-specific or site-specific options must be
configured depending on the customers DHCP server configuration.
For further information on configuring Full DHCP, see Data Networking for
Voice over IP (553-3001-160).

Accessing the Local Tools menu

Once the password is entered, the Local Tools menu remains active for 5
minutes. You can freely navigate, exit and reenter the Local Tools menu
without being prompted to reenter the password. To reset the timer before the
5 minute time expires, double-press the Services key.
If neither SECUREMENU nor PARTSECURE is present, then
the menu is not locked.
IMPORTANT!
IP Phones
Nortel IP Phone 2007
Description, Installation, and Operation
Page 169 of 630