Nortel 1110 Installation And Operation Manual page 306

Page 306 of 630
Keys and functions
Table 34
IP Phone 1110 keys and functions (Part 1 of 2)
Key
Line key
Hold
Goodbye
Visual Alerter/
Message Waiting
indicator
Feature status lamp
Context-sensitive soft
keys
Expand
Navigation keys
553-3001-368 Standard 26.00
Nortel IP Phone 1110
Table 34 describes the IP Phone 1110 keys and functions.
Function
Press the Line key to access the single DN and make a call.
Press the Hold key to put an active call on hold. Press the green Line
(DN) key to return to the caller on hold.
Press the Goodbye key to terminate an active call.
When a message is waiting, the red Visual Alerter/Message Waiting
indicator flashes. Also, when the phone rings, the indicator flashes.
When your IP Phone 1110 firmware is updating, the blue Feature
Status Lamp flashes.
Context-sensitive soft keys are located below the display area. The
LCD label above the key changes, based on the active feature. A
triangle before a key label indicates that the key is active.
Note: Context-sensitive soft keys are Call Server dependent and are
further enhanced in CS 1000 Release 5.0.
The Expand key is used to access an External Application Server
such as, Nortel Application Server.
The Expand key is reserved for future feature development.
Use the Navigation keys to scroll through menus and lists appearing
on the LCD display screen. The outer part of this key cluster rocks for
up, down, left, and right movements.
Use Up and Down keys to scroll up and down in lists, and the Left and
Right keys to position the cursor. You can also use the Left and Right
keys to select editable fields that appear on the phone. Press the Right
key to select the field below the current position, or press the Left key
to select the field above the current position.
August 2007